Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible

Finally, a hub worthy of the X0 name. Built to roll over the toughest mountain terrain, the SRAM X0 Hub proves that being solid doesn't mean being sluggish. DOUBLE TIME ratchet design gives you smooth 6.9-degree engagement—all while keeping everything light and steady. Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play. From pawl tooth to side cap, SRAM went the extra mile on the X0 Hub—so you have less to worry about on the trail. Go with what works. X0 Hubs can be customized perfectly to your ride. - DOUBLE TIME ratchet design gives you smooth 6.9-degree engagement - Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play - Versatile hub—light enough for XC, strong enough for All-Mountain - DOUBLE TIME ratchet mechanism for durable, quick engagement - SPEEDBALL precision cartridge bearings for light, smooth action. No play adjustment needed for simplicity and convenience - 3D forged hub shell with SEEKER angled flanges for durability and fewer broken spokes - 150mm version includes 12x150mm & 12x157mm endcaps - Drilling: 32h - Rotor type: 6-bolt

SRAM's X0 Hub offers lightweight, reliable performance. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions, and the tapered aluminum axle provides strength with minimal weight. This hub devours techy sections with it's super-smooth 6.9-degree engagement Double Time ratchet system. It accommodates standard 6-bolt rotors and comes with 12mm through-axle end caps and a 9mm quick release, so you can customize it to fit your ride.

The super fast engagement of Vault, now available for your custom wheel builds. Available in Boost and non-Boost and Shimano or XD cassette bodies. An oversized hub shell increases torsional and lateral stiffness, while proven 6902 bearings were selected due to their large ball diameter and durability. A 60-tooth drive ring alternately engages six double tooth pawls, giving you 3-deg engagement for near-instant power transfer. Wide bearing placement was designed to decrease load on the bearings, improving lifespan. Protecting the internals are low-drag labyrinth seals designed specifically for the Vault hubs. Finish it off with tool-free endcap swaps and you have a hub that not only moves faster but adapts faster.

- Axle/Spacing: 10/14 x 135mm nutted - International Standard 6-bolt disc rotor mount - 11 tooth (1/8") steel cog is pre-installed, ideal for compact drivetrain setup - Tough, instant pickup 120 point triple wedge pawl system with a bushed mini threaded driver for Singlespeed and Dirt Jump - Bushed driver is more durable than cartridge bearings - Forged 6061 aluminum shell, 2 main body sealed cartridge bearings - CrMo M10 bolt-in fittings with 6mm anti-rotation hex fitting (helps when tightening wheel in frame), 14mm adapters included

SRAM's Predictive Steering Hub is a dedicated hub interface for the inverted RockShox RS-1 fork. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions and the oversize, solid-aluminum Torque Tube axle delivers extreme strength and stiffness. It's equipped with standard 6-bolt rotor mounts and is not convertible to other axles.

SRAM's G8 hub delivers even gear spacing and responsive shifts in a sleek, robust hub system. This quick, responsive 8-speed hub is great for any type of riding, from commuting to touring thanks to the nearly-maintenance free internal gears.

SRAM's G8 hub delivers even gear spacing and responsive shifts in a sleek, robust hub system. This quick, responsive 8-speed hub is great for any type of riding, from commuting to touring thanks to the nearly-maintenance free internal gears.

DT's 350 MTB rear hub offers top-end performance for all your riding needs. DT Swiss' Ratchet freewheel system provides precise engagement, high load capacity, and reliability. The Ratchet System driver is extremely durable and can be easily serviced—without tools—in minutes thanks to it's press fit assembly. The press fit assembly also allows the hub to work with a wide array of axle configurations; by simply swapping out the tool-free end caps (sold separately), you'll be able to enjoy the legendary DT Swiss quality on almost any bike. • Accepts 6-bolt rotors

The 350 road hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these hubs will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement no matter how hard you stomp on the pedals.

- Boost developed straightpull hub with unique oversized flanges - 32H configuration, which vastly improve contact and support between spokes in a 3 cross lacing - Offering added spoke strength, wheelset stiffness, and spoke torque retention - Shimano Standard/Steel XD drivers available - MATERIAL: CNC optimized alloy hub body, alloy axle, alloy freehub body - CONFIGURATION (mm): 12x148 Boost, SLS straight pull - WEIGHT (g): ±282 - HOLE COUNT: 32H - DISC MOUNT: 6-bolt - FREEHUB: Alloy XD Standard - FREEHUBS AVAIL.: Steel Shimano Standard / Alloy Shimano / Steel XD - ADAPTERS INCL. (mm): N/A - ADAPTERS AVAIL. (mm): N/A - FINISH: Polish anodized, laser logos

- Trail riding optimized straightpull hub with unique oversized flanges, - 32H configuration, which vastly improve contact and support between spokes in a 3 cross lacing - Offering added spoke strength, wheelset stiffness, and spoke torque retention - Shimano Standard/Steel XD drivers available - MATERIAL: CNC optimized alloy hub body, alloy axle, alloy freehub body - CONFIGURATION (mm): 12x142mm, SLS straight pull - WEIGHT (g): ±281 - HOLE COUNT: 32H - DISC MOUNT: 6-bolt - FREEHUB: Alloy XD Standard - FREEHUBS AVAIL.: Steel Shimano Standard / Alloy Shimano Standard / Steel XD - ADAPTERS INCL. (mm): QRx135mm, 12x142 - ADAPTERS AVAIL. (mm): QRx135mm, 10x135mm, 12x135mm, 12x142mm - FINISH: Polish anodized, laser logos

Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Fully convertible with tool-free end caps - BOOST variants - 24, 28 or 32 spoke holes

Whether the goal is a finish line, epic adventure or simply getting back home again, our new 900 hubs are ready for the challenge. On the inside, our smooth and durable DOUBLE TIME drive mechanism ensures rapid lightning-fast engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Includes Quick Release & 12x142mm Through AxleCaps - Fully convertible with tool free end caps - DOUBLE TIME mechanism offers smooth,quick and durable engagement - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Axle type: Conversion Caps included - Spoke holes: 24 - Brake compatibility: Disc (6-bolt) - Driver Mechanism: Double Time - Four Pawl - Axle material: Tapered aluminum - Driver body material: Aluminum - Hub shell: Aluminum - Seeker angled flanges - Oversized body

SRAM's X0 Hub stops at nothing for a lightweight hub that's worthy to wear the X0 name. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions and the tapered aluminum axle delivers strength with minimal weight. It's equipped with standard 6-bolt rotor mounts and is convertible from quick-release to 15mm to 20mm through-axles.

Finally, a hub worthy of the X0 name. Built to roll over the toughest mountain terrain, the SRAM X0 Hub proves that being solid doesn't mean being sluggish. Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play. SRAM went the extra mile on the X0 Hub—so you have less to worry about on the trail. Go with what works. X0 Hubs can be customized perfectly to your ride. - Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play - Versatile hub—light enough for XC, strong enough for All-Mountain - SPEEDBALL precision cartridge bearings for light, smooth action - 3D forged hub shell with SEEKER angled flanges for durability and fewer broken spokes - Drilling: 32h - Rotor type: 6-bolt

- Elite Series convertible MTB hubs - Available in multiple axle configurations - Shimano and XD cassette body options with 6 pawl/54 point/6.6-degree engagement - Straight pull and J-bend spoke options - 6 bolt disc brake rotor compatible - Sealed bearings - Material: AL6061 J-Bend/QR: - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 32.95mm - LTF-R: 48.45mm - CTF-L: 34.7mm - CTF-R: 19.2mm J-Bend/142 x 12mm: - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 36.45mm - LTF-R: 51.95mm - CTF-L: 34.7mm - CTF-R: 19.2mm Straight Pull/QR: - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 36.2mm - LTF-R: 50.1mm - CTF-L: 31.45mm - CTF-R: 17.55mm Straight Pull/142 x 12mm: - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 39.7mm - LTF-R: 53.6mm - CTF-L: 31.45mm - CTF-R: 17.55mm

Product specs: - Front hub features - 7075 t6 alloy axle - Qr or 15mm axle type - Japanese cartridge bearings - 28,32 hole count - 205g - Rear hub features - 7075 t6 alloy axle - Qr or 12x142mm axle type - Four sealed cartridge bearings - 28,32 hole count - 325g

- Axle/Spacing: 10/14 x 135mm bolt-on - Micro-drive cassette rear hub for Singlespeed and Dirt Jump - International Standard 6-bolt disc rotor mount - Bushed driver for greater durability over cartridge bearings (bearings have to be smaller for micro drive, thus prone to higher loads) - Forged 6061 aluminum shell, 2 main body sealed cartridge bearings - Includes 11 tooth (1/8") steel cog, ideal for compact drivetrain setup - CrMo M10 bolt-in fittings with 6mm anti-rotation hex fitting (helps when tightening wheel in frame) - 14mm adapters included - 9/10/11/13/16t mini sprockets available separately - 12mm thru-axle conversion for DJD-BD sold separately

- Strength, durability and convenience similar to our DH Rear Hubs - Highly adaptable spacing, fitting most non-DH bikes - Adaptability between 135 and 142 configuration - Shimano Alloy Standard/Steel XD drivers available - MATERIAL: CNC optimized alloy hub body, hardened steel axle and Alloy freehub body - CONFIGURATION (mm): 12x135, J-hook - WEIGHT (g): ±320 - HOLE COUNT: 32H - DISC MOUNT: 6-bolt - FREEHUB: Alloy XD Standard - FREEHUBS AVAIL.: Alloy Shimano Standard / Steel Shimano Standard / Steel XD - ADAPTERS INCL. (mm): 12x142, 12x135 - ADAPTERS AVAIL. (mm): QRx135 / 10x135 / 12x135 / 12x142 - FINISH: Polish anodized, laser logos

- Traditional 32 hole J-Hook Hub light weight, high performance - Offering sharp engagement without compromising durability - Adaptability between 150 and 157 configuration - Shimano Standard/Steel XD drivers available

Built with labyrinth and contact seals to remain silky smooth in dusty, muddy, wet, and sandy conditions, and with highly refined cup and cone surfaces, the XTR front hub is perfect for custom MTB wheel builds. - Hole count: 28

Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading.

- Adjustable double sealed cartridge bearings and labyrinth seals - Wide canted flanges build a no dish wheel - Large 8mm bolts and knurled washer face for maximum hold - Accepts 24tpi BMX freewheels. 300g - 32-hole - Made in USA

Built with labyrinth and contact seals to remain silky smooth in dusty, muddy, wet, and sandy conditions, and with highly refined cup and cone surfaces, the XTR front hub is perfect for custom MTB wheel builds. - Traditional flange

Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. The splined freehubs have 28 points of engagement, the XD driver has 56. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity. - Weight: 277g - Includes 12mm thru-axle end caps and quick release skewer - Drive Side Center To Flange 18.5mm - Non-Drive Center to Flange 34mm - Non-Drive Flange Diameter 58mm - Drive Side Flange Diameter 49mm

The DualDrive3 hub is the heart of SRAM’s unique DualDrive system. With its 3-speed internal-gear hub and an external cassette and derailleur (sold separately), this hub offers a wide-range of gears in a clean, easy-to-use system. It will accept 8-, 9-, and 10-speed cassettes.

From World Cup DH runs to big hits on your local trails, Shimano's Saint rear hub is the answer. Its overbuilt features, like a 12mm thru-axle, beefy flanges, and impact-resistant angular contact bearings, give you the confidence you need to go big and stick the landing. The freehub uses micro-ratchet construction for fast engagement so you can sprint out of the corners and pick up speed for that next double. It's compatible with 8-,9-, and 10-speed drivetrains and uses Shimano's Centerlock Rotor Mount to keep rotor swaps easy.

Shimano's Dura-Ace Track Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed.

- Elite Series convertible road disc hubs - Available in multiple axle configurations - Straight pull and J-bend spoke options - 6 bolt and Center Lock disc brake rotor options - Sealed bearings - Material: AL6061 Straight Pull Spoke/6-Bolt Disc: PCD-L: 36mm PCD-R: 36mm LTF-L: 27.75mm LTF-R: 15.25mm CTF-L: 22.25mm CTF-R: 34.75mm J-Bend Spoke/Centerlock Disc: PCD-L: 45mm PCD-R: 45mm LTF-L: 27.25mm LTF-R: 15.45mm CTF-L: 22.75mm CTF-R: 34.55mm

From World Cup DH runs to big hits on your local trails, Shimano's Saint rear hub is the answer. Its overbuilt features, like a 12mm thru-axle, beefy flanges, and impact-resistant angular contact bearings, give you the confidence you need to go big and stick the landing. The freehub uses micro-ratchet construction for fast engagement so you can sprint out of the corners and pick up speed for that next double. It's compatible with 8-,9-, and 10-speed drivetrains and uses Shimano's Centerlock Rotor Mount to keep rotor swaps easy.

- Internal gear 8-speed hub with 70mm drum brake - Rotary gear selection with no protruding indicator chain or switch box - Direct drive in first gear allows use of smaller chainwheels - A356 aluminum hub shell with 13/32" slotted solid axle (185mm overall axle length) - Gear ratio range of 325% - Includes 3-spline 23 tooth cog and a TSS86 twist shifter. Brake lever sold separately

SRAM's X9 hubs are built tough with light aluminum hubshells for the strength to tackle the mountain year after year. You'll love the durable high-precision cartridge bearings that spin smoothly in all conditions. Plus, careful machining helps keep the X9's weight low without compromising durability.

The DualDrive3 hub is the heart of SRAM’s unique DualDrive system. With its 3-speed internal-gear hub and an external cassette and derailleur (sold separately), this hub offers a wide-range of gears in a clean, easy-to-use system. It will accept 8-, 9-, and 10-speed cassettes.

- Aluminum Hub Shell - Super polished Bearing Races - Over Locknut: 120mm - Stainless Steel Ball Bearings - Contact Sealing: Dust Cap - Average Weight: 298g (w/o lockring)

The DH-UR700-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch quick-release wheels. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Angular contact bearings - Compact & lightweight - Low rotational resistance - Durable sealing performance

- Produced by one of Japan's oldest hub makers - Silky smooth Japanese sealed cartridge bearings - High polished finish - Choose fixed/free or fixed/fixed flip-flop rear hub - Hub spacing: 120mm OLD

SRAM's X9 hubs are built tough with light aluminum hubshells for the strength to tackle the mountain year after year. You'll love the durable high-precision cartridge bearings that spin smoothly in all conditions. Plus, careful machining helps keep the X9's weight low without compromising durability.

- 32H configuration, which vastly improve contact and support between spokes in a 3 cross lacing - Offering added spoke strength, wheelset stiffness, and spoke torque retention - Alloy Shimano Standard - Shimano Standard/Steel XD/Alloy XD drivers available - MATERIAL: CNC optimized, alloy hub body, steel axle and freehub body - CONFIGURATION (mm): 12x148mm, J-hook - WEIGHT (g): ±316 - HOLE COUNT: 32H - DISC MOUNT: 6-bolt - FREEHUB: Alloy Shimano Standard - FREEHUBS AVAIL.: Steel Shimano Standard / Alloy XD Standard / Steel XD - ADAPTERS INCL. (mm): 12x148 - ADAPTERS AVAIL. (mm): N/A - FINISH: Polish anodized, laser logos

The Shimano Alfine DH-UR705-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch Center Lock wheels and uses a 12 x 100mm E-THRU axle design. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Proper positioning with 12mm E-THRU - Angular contact bearings - Compact & lightweight - Low rotational resistance - Effortless setting of disc rotor - Durable sealing performance

High quality sealed bearing hub is available in traditional and modern configurations. - Steel axle, aluminum end caps with steel knurled contact surfaces - Same proven driver mechanism as higher priced models - Spoke Interface: J-Bend - Hub/Brake Compatibility: 6-Bolt Disc - Skewer Included: No - Bearing Type: Sealed Cartridge

- Aluminum Hub Shell - Over Locknut: 100mm - Stainless Steel Ball Bearings - Spoke Hole Circle: 38mm - Center to Flange (Right): 37mm - Center to Flange (Left): 37mm - Average Weight: 203g

Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g

Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced. Rim brake hubs include quick release end caps and skewer. On all models we spec high-quality made in Japan stainless-steel sealed bearings. Freehub bodies have 28 points of engagement. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity. - Weight: 227g - Drive Side Center To Flange 16.25mm - Non Drive Center To Flange 36.25mm - Non Drive Flange Diameter 41mm - Drive Side Flange Diameter 49mm

- Internal gear 3-speed hub with HG-splined 8-10sp freehub body for use with any IS 6-bolt disc brake - 6061 aluminum hub shell with 13/32" slotted solid axle (179mm overall axle length) - Gear ratio range of 177% (33% each step) - Cassette and shifters sold separately. Special shifter setup required: internal 3sp is shifted via a standard mountain 3sp front derailleur shifter. Sturmey Archer shifters not compatible with this hub

Change gears any time: uphill, downhill, while pedaling or even sitting still with SRAM's i-MOTION Hub. You can explore new terrain with the 3-speed range and stop easily with powerful disc brake (sold separately). The internal shifting mechanism is protected inside the hub shell for excellent durability that's ready to go whenever you are. It's extremely low maintenance so all you have to do is enjoy the ride!

- Centerlock, 11-speed compatible road hubs - Sealed bearings keep out contamination and dirt while providing a smooth rotation - Skewer included

New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do. They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability. Front hub specs: - Weight: 198g - Torque Spec: 33nm (25ft lbs.) - Non-Drive Side Center to Flange: 34mm - Drive Side Center to Flange: 34mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm Rear hub specs: - Weight: 234g - Torque Spec: 33nm (25ft.lbs.) - Non-Drive Side Center to Flange: 29mm - Drive Side Center to Flange: 29mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm

- Various HyperGlide freehub body assemblies for Halo freehubs - Shimano/SRAM 8-10-speed - Spin Doctor, Spin Doctor Pro and Spin Doctor 6-Drive parts are generally not cross compatible - DJD and DJD-BD parts are generally not cross compatible

Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.

- Compatible with 26 to 28" wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output

Like to Freestyle? Try our Deputy hubs. The low-profile flanges are stronger and more impact-resistant than standard high-flange track hubs. - Tool Free adjustment, hub bearings are properly loaded when the wheel is installed - 6061 T6 aluminum hub shell - Low flange design for freestyle durability - 13 through 15 gauge spoke compatibility - Chamfered hub flanges reduce spoke stress - 6902 sealed bearings readily available - Weight: 247 g - Non-Drive Side Center to Flange: 34mm - Drive Side Center to Flange: 34mm - Non-Drive Side Flange Diameter: 58mm - Drive Side Flange Diameter: 58mm - Hub Spacing: 100mm

Surly's Ultra New Disc Rear Hub is just the thing for singlespeed fanatics and one-gear mountain riders. This gorgeous hunk of aluminum boasts reliable sealed bearings and a 6-bolt disc attachment on one side and threads for a singlespeed freewheel (or fixed cog) on the other. A hollow axle lets you choose how to secure it to your dropouts. You have choice between the included fixing bolts or a quick release skewer (sold separately). And, that aforementioned chromoly axle is flex-free to take all the abuse you can dish out, and then some!

SRAM's X9 hubs are built tough with light aluminum hubshells for the strength to tackle the mountain year after year. You'll love the durable high-precision cartridge bearings that spin smoothly in all conditions. Plus, careful machining helps keep the X9's weight low without compromising durability.

Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from mtb to road and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release, 12mm, and 15mm endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity in our modern world. - Weight: Disc Brake: 164g - Includes 12mm, 15mm endcaps and quick release skewer - Non-Drive Side Center To Flange Disc Brake: 21mm - Drive Side Center To Flange Disc Brake: 36mm - Non-Drive Flange Diameter Disc Brake: 58mm - Drive Side Flange Diameter Disc Brake: 45mm

Light, but strong enough for all types of riding including XC through DH - Forged, CNC machined aluminum shell, 2 sealed cartridge bearings - International Standard 6-bolt disc rotor mount - Includes endcaps to switch for 9x100mm QR, 15x100 thru-axle and 20x110mm thru-axle

- Replacement driver for Original DJD or DJD-Bush Drive rear hub - Need DJD Original removal tool or DJD Bush Drive removal tool (sold separately)

From World Cup DH runs to sessioning your local trails, Shimano's Saint front hub is the answer. Centered around an oversize hub shell and a 20mm thru-axle, the Saint Front Hub is rock solid, with beefy flanges and Shimano's angular contact bearings, which balance destructive impacts from any direction. And, Shimano's Centerlock Rotor Mount makes installing rotors a breeze.

- Front: 9 x 100mm quick-release, 24-hole - Rear: 10 x 130mm quick-release, 24-hole - Lightweight and silky smooth 7075 alloy road racing hubs use straight pull spokes - Front has 2 sealed bearings, alloy axle - Rear features 6 pawls with double tips giving 12 point simultaneous engagement on a 30 point drive ring (12 degree engagement), CNC 7075 hard aluminum cassette body with Shimano HG splines, plus 4 sealed cartridge bearings and a lightweight alloy axle - Shimano/SRAM 8-10 speed (with spacer), Shimano/SRAM 11-speed road cassette compatible

Change gears any time: uphill, downhill, while pedaling or even sitting still with SRAM's i-MOTION Hub. You can explore new terrain with the 3-speed range and stop easily with the classic coaster brake. The internal shifting mechanism is protected inside the hub shell for excellent durability that's ready to go whenever you are. It's extremely low maintenance so all you have to do is enjoy the ride!