- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset
$12.99 - $15.99
• Unicycle-specific seatpost
Made from lightweight alloy, this durable seatpost will fit all State Bicycles (except City bikes) as well as many other bicycles. Choose size 27.2mm for all State Bicycle Co.'s standard bikes, or 31.6mm for 6061 Black Label** models. Please check the required measurement of any non-State Bicycle with the owner's manual or a professional bicycle mechanic to ensure proper fit. **Please double check the specs of your frame prior to ordering. Some Black Label bikes are spec'd with a 30.9mm seatpost size.
$27.95 - $35.95
- A strong, lightweight alloy post, licensed from Pivotal BMX Inc. - Allows seat to be dropped lower than conventional posts - 3D forged 7075 alloy post with internal oval construction for strength - 10mm bolt tightening system, accessed through a slot in Pivotal Seat top (seat sold separately) - 100g (24.5mm) / 258g (27.2mm)
The name says it all: Thomson's Masterpiece Seatpost combines the best materials, exceptional strength, perfect function, light weight and the classic beauty of all Thomson products. All Masterpiece posts are extruded and then painstakingly machined from a single block of ultra-strong 7000-series aluminum, and they all weigh less than 200 grams complete. This means you get a post tough enough for any ride on or off road and at a nice and light weight that will complement your dream bike. What's more, you get Thomson's easy-to-adjust and super reliable 2-bolt seat clamp that makes it a breeze to dial in your perfect seat position from minus 5 degrees to plus 29 degrees.
The EA70 Zero is Easton’s top-end aluminum seatpost, with a sleek, low-profile clamp design, impressive stability and great clearance. This post features EA70 TaperWall aluminum tubing coupled with a durable two-bolt integrated head.
The Reverb Stealth features Vent Valve Technology for super simple service if the need arises. Redesigned internals provide effortless actuation and increased reliability. With reduced overall post lengths and new travel options, riders of all shapes and sizes benefit from more travel than ever before. The new Reverb Stealth redefines what it means to simply go up and down. - Shorter overall post length - Stealth Internal cable routing
Get your saddle down and out of the way and up your technical skills with a game-changing dropper. The Koryak Internal dropper routes cables through the frame for a clean, snag-free assembly. - AL-7000 series aluminum - Infinite travel 150mm - Internal cable routing
The Ritchey Comp 2-Bolt post is compatible with multiple rail types and features an extra-secure 2-bolt clamp. - Internally ovalized to maximize strength - Two-bolt design for easy-to-adjust, vise-like grip - Low-profile clamp reduces stress on lightweight rails and won’t bottom out - Bolts oriented to the axis of the rails for greatest contact area with the saddle
Carbon seatpost with a proven low-profile, 2-bolt clamp that won't bottom out on the saddle. - Low-profile clamp reduces stress on lightweight rails - 2-bolt design securely holds the saddle in place and is easy to adjust - Offset: 25mm - Clamp Style: Standard Rails - Material: Carbon
Whether it's a cross remount, an unexpected pothole, or a rough line down the trail, the WCS Zero post will not relinquish its position. Featuring a confidence-inspiring extra-secure fore/aft bolt system, the Zero post is second-to-none in ease of installation and fit adjustment. - Fore/aft adjustment bolts for precision adjustment and secure clamping - 3D Forged 2014 Alloy - Offset: Zero - Cradle: Standard saddle rail clamp
- Length: 400mm - Offset: 0mm - Clamp Style: Standard Rails - Material: Aluminum
The smooth and sleek design of the patented SideBinder clamp makes the Ritchey WCS Carbon 1-Bolt a sophisticated choice to finish off a performance-oriented build. The beauty of this carbon masterpiece lies in the simplicity of the design of the wide clamp head. Secured with a single 5mm bolt, this post offers ease of adjustability while relieving stress on saddle rails. - Monocoque carbon construction - Available in 27.2 & 31.6mm diameters - Available in 350 and 400mm lengths - 7x7mm saddle rail clamp included - Interchangeable clamps available for all different carbon rail sizes - Saddle clamp torque spec: 12Nm - Matte UD carbon finish - 185g (27.2/350)
$5.99 - $12.49
• Steel • Polished-chrome finish • 7/8-inch seat-clamp diameter
WeThePeople's Socket Pivotal seat post is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and comes in the perfect color and size to match your bike. Plus, there's a 17mm socket head built into the bottom of the post for park-side adjustments to your wheels.
$89.99 - $92.99
FSA's Afterburner is a tough, lightweight seatpost that works great on road and mountain bikes. Its 1-piece 3D-forged aluminum construction makes it strong and stable while remaining light. And, it's super easy to adjust thanks to the convenient 2-bolt clamp.
KS's Zeta post adds a sleek, seamless appearance to dropper function, making it a excellent choice for drop-bar and cross-country race bikes. The low drop allows for lower center of gravity for high speed descents and more nimble bike handling in technical situations without the bulk of a more trail-oriented dropper post. - Max. Height: 244mm - Min. Height: 136mm - Remote Position: Left or Right - Cable Routing: Internal
FSA's Metropolis seatpost is CNC machined from AL6069 aluminum and features a forged alloy single-bolt head with chromoly hardware. Simple and elegant, this seatpost gets the job done weighing a scant 257 grams.
Full UD carbon shaft with alloy clamp - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - Available in 0mm and 15mm setback options - ISO-Mountain safety certified
Easton's EA50 Seatpost is rugged, reliable and perfect for all your cycling adventures. It's made from 2014-aluminum with Easton's TaperWall technology that controls the post's internal thickness, adding material where you need it and none where you don't. It provides excellent strength and durability while keeping the weight low. Plus, the EA50 boasts an easy-to-use 2-bolt clamp for secure seat adjustments.
The State Bicycle Co. original seatpost clamp. Will fit all standard model State Bicycle Co. bikes (except 6010 and City models) as well as many others. Please check the required measurements of any non-State bicycle with the owner's manual or a professional bicycle mechanic to ensure proper fit. - Inside diameter 29.5mm - 30mm
Thomson's Elite Setback Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacturer/Seatpost Collar - Weight: 210g (25.4mm), 204g (27.2mm), 204g (30.9mm), 204g (31.6mm)
Since the introduction of Zipp's line of Service Course SL components, they've had amazing success with pro-level athletes in all disciplines. While the successes have been coming, they've also drawn from riders' feedback. Zipp not only learned how and why athletes make their equipment choices, but how manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, they're proud to introduce a completely redesigned Service Course SL seatpost with a carbon tube and aluminum head for better shock absorption and weight savings. - Lightweight clamping system - Updated carbon tube material
- RaceFace Ride XC Seatposts made of forged AL-6061 - Forged, anodized and shot peened AL-6061 mast - 2-bolt head holds saddle securely while retaining easy adjustability - Weight: 295 g
The Chester seatpost from Race Face is a durable, no-nonsense post that can take on rock gardens and plenty of rough landings while still leaving bills in your pocket for aprés ride festivities. Features • Seat tube drawn from 6061 Alloy • Proven dual bolt, multi-adjustable head design. • Shot peened for high impact strength & fatigue resistance.
On today’s road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored seatpost color is available on the Zipp Service Course Seatpost. Since the introduction of our line of Service Course and Service Course SL components, we’ve had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, we are proud to offer redesigned Service Course seatposts. - Distinctive silver finish - Material: 6061 aluminum - 2-bolt adjustability - Minimum insertion length: 90mm
Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7. - Carbon shaft absorbs trail chatter - UD carbon shaft, forged aluminum head
Ionic is a seatpost design featuring the sophisticated and robust, 3T–exclusive DiffLock seat clamp. Ionic–25 places the seat clamp assembly 25mm behind the seatpost’s centerline. This gives athletes the option of a more rearward position on today’s shorter framesets. The splined alloy DiffLock coupling is a highly accurate method of setting saddle angle, needing only lightweight clamping by side-mounted bolts. It is especially useful for fine adjustment of saddle setback, which can be done without impacting saddle angle. The Ionic–25 Ltd is a monocoque in high-modulus carbon fiber, finished in UD Gloss Black. - Monocoque high modulus carbon-fiber seatpost - Alloy Difflock seat clamp fits only saddles with 7mm round-section rails