In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48T and 50T variants have fully integrated power into a direct mount aero chainring - 36-46T variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - Bottom bracket not included - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE

- AXS enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48 - Bolt Circle Diameter (BCD): 107 BCD - Power Meter Type: ANT USB

- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: Ant USB

The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Wide chainline crankset for bikes with the widest gravel tires

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant,integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - BB not included

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant,integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Wide chainline crankset for bikes with up to 700x45c or 27.5x2.1" tire widths (43/30T chainrings only) - BB not included

Every innovation in Quarq's DZero platform represented the 10+ years of Quarq's advances in power meter technology. This same platform is now combined with XX1 Eagle DUB CARBON TUNED crankset—lightest, stiffest, and strongest to date, and X-SYNC 2 chainring—providing significantly quieter performance with better mud clearing and extraordinary durability. Ready to power every ride. - Bluetooth low energy technology and ANT+ wireless data transfer - MagicZero: automatically checks and recalibrates your power meter as you ride (no need to manually calibrate) - AxCad: no cadence magnet required - 10K Temperature Compensation - Battery: CR2032, 200-hour battery life, change without tools - OmniCal: swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy: within 1.5%, measuring both legs

Enjoy the ultimate advantage of freedom and adventure that Eagle provides combined with the Quarq power meter platform that delivers on accuracy and reliability. The SRAM Eagle XX1 power meter is built to pair with the SRAM Eagle drivetrains, providing a significantly quieter performance and extraordinary durability. Take it on the dirtiest, gnarliest trails while maintaining confidence in your cycling components. You came to perform; the Eagle XX1 power meter will perform with you. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather or trail condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh environments do not hold you back, then you need a product capable of rising to the occasion. The Eagle XX1 power meter is designed to be rough-and-tumble tough. Train harder, ride faster and unlock your ultimate potential. The Eagle XX1 power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. The Eagle XX1 also features Bluetooth low energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer. - Speeds: 11/12 - BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - Bolt Circle Diameter (BCD): 104 BCD - Chainline: 52.0mm - BB Spindle Interface: DUB - Power Meter Type: ANT+ and BLE - Crank Arms/Chainrings not included

DZero is Quarq's next-generation power meter platform for those who live to be challenged, pushed, and tested in the toughest scenarios imaginable. Now Quarq has introduced a DZero spider designed to replace the factory spider on Specialized's S-Works carbon crankset. Quarq DZero for Specialized embodies 10 years of Quarq advances in power meter technology, plus new features such as dual Bluetooth low energy and ANT+ wireless data transfer, revised circuitry, a new strain gauge design and the Qalvin BLE app. You also get AxCad accelerometer cadence, the easy-to-replace CR2032 battery, an IPX7 waterproof rating and a 2-year warranty. Features & Benefits: - Bluetooth low energy technology and ANT+ wireless data transfer - AxCad – no cadence magnet required - 10K Temperature Compensation - Battery – CR2032, 200-hour battery life, change without tools - Power Balance - OmniCal – swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy – within 1.5%, measuring both legs - Free firmware upgrades with the Qalvin app Essential Details: - Traditional 5-arm spider compatible with Specialized S-Works Carbon Road Crank Arms from 2013-Current. - Available in 130 BCD and 110 BCD. - Replaces the standard spider. - A Specialized lockring tool is required for installation.

Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The DFour DUB was designed specifically for Dura-Ace R9100 chainrings. Train using a Quarq power meter without changing your drivetrain. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh climates do not hold you back, then you need a product capable of rising to the occasion. That is exactly what the DFour DUB power meter is made for. Train harder, ride faster, and unlock your ultimate potential. The DFour DUB power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. DFour DUB features Bluetooth low-energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer. Features - Bluetooth low-energy technology and ANT+ wireless data transfer - MagicZero - automatically checks and recalibrates your power meter as you ride – no need to manually calibrate - AxCad - no cadence magnet required - 10K Temperature Compensation - Battery - CR2032, 200-hour battery life, change without tools - OmniCal - swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy - within 1.5%, measuring both legs

Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The DFour DUB was designed specifically for Dura-Ace R9100 chainrings. Train using a Quarq power meter without changing your drivetrain. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh climates do not hold you back, then you need a product capable of rising to the occasion. That is exactly what the DFour DUB power meter is made for. Train harder, ride faster, and unlock your ultimate potential. The DFour DUB power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. DFour DUB features Bluetooth low-energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer. Features - Bluetooth low-energy technology and ANT+ wireless data transfer - MagicZero - automatically checks and recalibrates your power meter as you ride – no need to manually calibrate - AxCad - no cadence magnet required - 10K Temperature Compensation - Battery - CR2032, 200-hour battery life, change without tools - OmniCal - swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy - within 1.5%, measuring both legs

Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The DFour DUB was designed specifically for Dura-Ace R9100 chainrings. Train using a Quarq power meter without changing your drivetrain. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh climates do not hold you back, then you need a product capable of rising to the occasion. That is exactly what the DFour DUB power meter is made for. Train harder, ride faster, and unlock your ultimate potential. The DFour DUB power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. DFour DUB features Bluetooth low energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer. Features - Bluetooth low-energy technology and ANT+ wireless data transfer - MagicZero - automatically checks and recalibrates your power meter as you ride – no need to manually calibrate - AxCad - no cadence magnet required - 10K Temperature Compensation - Battery - CR2032, 200-hour battery life, change without tools - OmniCal - swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy - within 1.5%, measuring both legs

Pioneer's power meters are simply some of the best power-monitoring systems on the planet, and the SGX-CA500 computer is your chance to get the most out of your power meter and have a world-class data display. Pioneer has created the first, and only, power meter that measures power output and pedaling stroke efficiency for each individual leg, and the SGX-CA500 lets you analyze this data in real time. A few quick swipes give you access to your state-of-the-art ride data, and intuitive controls allow for scrolling, zooming, and screen customization to let you see what you want, when you want it. The 1.87-inch LCD screen makes it incredibly easy to see critical data, even if you are on the rivet up the final climb. As an added bonus, users of Shimano’s Di2 electronic road bicycle shifting system can now utilize the SGX-CA500 to track gearing and system status as they ride. - Delivers high functionality for practical situations, in a small, lightweight (75 g) package - Visualizes pedaling state and efficiency through graphical displays of force vectors (when used together with a pedaling monitor sensor) - Enables new modes of training focused on pedaling skill development - Displays over 100 data types, such as power, cadence, speed, and incline, all in real time - Easy, intuitive touch-panel operation, even when wearing full-finger gloves - Upload data to Cyclo-Sphere, our online data analysis service, via USB or Wi-Fi connection (Wi-Fi Internet connection required) - Weight: About 75 g - Dimensions: 58 mm (W) x 58 mm (H) x 19 mm (D) (without projection parts) - Connector: microUSB - Water-resistance: This device has a water-resistance rating of IPX-6/IPX-7 - Communications system (sensors): ANT+ - Communications method (network): Wi-Fi - Positioning system (latitude/longitude): GPS - Positioning system (altitude): Atmospheric pressure sensor - Display: 160x128 pixel, horizontal 1.87-inch outdoor type, Black and white touch panel (resistive touch display) - Built-in flash memory: 4 GB (user available capacity 3 GB) - Guaranteed operational temperature range: -10 to 50°C - Charging temperature: 0 to 45°C - Power supply voltage: DC 5V - Battery type: Lithium-ion battery - Battery operating time: Approximately 12 hours (the battery operating time may decrease depending on the operating conditions) - Charging time: Approximately 4 hours (Power off or normal charging) - Accessories: Bracket, USB cable, Strap, Quick Start Guide, Warranty card, Important Information for the User - Specifications and design are subject to change without notice.

Rally RK100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RK100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite LOOK KEO cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 334g - Water resistance: IPX7 - Cleat type: KEO - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RK100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Rally RK200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RK200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite LOOK KEO cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 326g - Water resistance: IPX7 - Cleat type: KEO - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RK200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Rally RS100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RS100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD-SL cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 328g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Rally RS200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RS200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite Shimano SPD-SL cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 320g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Rally XC100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally XC100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Rally XC200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally XC200 measures much more. These metrics help you identify your strengths and weaknesses, so you can work to improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

If you're not using a power meter and tracking your watts, then you're giving the competition an advangage. SRAM's Quarq CinQo Power Meter integrates into the crank spider for easy installation, low weight, and minimal maintenance. It's ANT+ wireless compatible, enabling you to use the head unit of your choice (sold separately), and it has no wires or external sensors, which means that your beautifully sleek road machine stays clutter-free. Since the power sensor is in the crank, you can easily switch wheels for race day. Other nice features include an easily replaced battery (no overnight charging!) and a wattage reading accuracy of +/- 2%. Also, calibration values are stored in the CinQo so there's no need to re-calibrate if you switch head units.

If you're not using a power meter and tracking your watts, then you're giving the competition an advangage. SRAM's Quarq CinQo Power Meter integrates into the crank spider for easy installation, low weight, and minimal maintenance. It's ANT+ wireless compatible, enabling you to use the head unit of your choice (sold separately), and it has no wires or external sensors, which means that your beautifully sleek road machine stays clutter-free. Since the power sensor is in the crank, you can easily switch wheels for race day. Other nice features include an easily replaced battery (no overnight charging!) and a wattage reading accuracy of +/- 2%. Also, calibration values are stored in the CinQo so there's no need to re-calibrate if you switch head units.

If you're not using a power meter and tracking your watts, then you're giving the competition an advangage. SRAM's Quarq Quatro Power Meter integrates into the crank spider for easy installation, low weight, and minimal maintenance. It's ANT+ wireless compatible, enabling you to use the head unit of your choice (sold separately), and it has no wires or external sensors, which means that your beautifully sleek machine stays clutter-free. Since the power sensor is in the crank, you can easily switch wheels for race day. Other nice features include an easily replaced battery (no overnight charging!) and a wattage reading accuracy of +/- 2%. Also, calibration values are stored in the Quatro so there's no need to re-calibrate if you switch head units.

If you're not using a power meter and tracking your watts, then you're giving the competition an advantage. SRAM's brilliantly stiff, light RED cranks feature a Quarq Power Meter integrated into the crank for easy installation, low weight, and minimal maintenance. Your power info is transmitted ANT+ wirelessly, enabling you to use the head unit of your choice (sold separately), and with no wires or external sensors, your beautifully sleek road machine stays clutter-free. Other nice features include an easily replaced battery and a wattage reading accuracy of +/- 1.5%. Also, calibration values are stoRED in the CinQo so there's no need to re-calibrate if you switch head units or swap chainrings. Plus, since the power sensor is in the crank, you can easily switch wheels. In addition, SRAM's X Glide R chainrings deliver world-class front shifts, and the oversize carbon arms transfer every watt of your strength.

The crankset is the heart of your bicycle and where you’ll find the SRAM RED Quarq power meter. The sole job of the crankset is to convert the effort from both legs to forward motion. It is the perfect place to measure power. This power meter works for every discipline: Road, triathlon, time trial, and cyclo-cross. The chainrings are replaceable should your bike, discipline, or ability change. - A direct force power meter that measures total power output from both legs with +/-1.5% accuracy - Works for every discipline: Road, triathlon, time trial, and cyclo-cross - No compromises on materials, shifting, wheels, or pedal choice - Proven by pro teams and athletes throughout the world – Cobbled Classics, Giro d’Italia, Tour de France, Vuelta a España, World Championships - Number 1 at the Ironman World Championship for the last three years - Uses a hidden bolt to mount the chainrings – compatible SRAM chainrings ensure the derailment pin lines up behind the crank arm - 10K – programmed with over 10,000 data points to eliminate temperature effects on power measurement - AxCad – A multi-axis accelerometer switches the power meter on and measures cadence, simplifying installation and operation - Breakthrough Materials – Exogram hollow carbon fiber crank arms – the lightest, strongest crank arms SRAM makes – minimize weight and maximize speed [ELSA RS, ELSA R and SRAM RED] - Easy to use (and reuse) – LED indicator and visible ANT+ ID - The replaceable CR2032 battery never leaves you without power - Manual and automatic zeroing make it truly set and forget - Built to Last – IPX7 waterproof rating, 2-year warranty, free firmware updates, and acclaimed international support - Moves with you from bike to bike - With Quarq's free Qalvin app – available for Windows, Mac, iOS and Android – you can set the zero offset, check battery voltage, run diagnostics, and perform firmware updates for free Arm Material: Carbon arms, Machined alloy spider Weight: 778 grams (GXP 172.5mm 53x39 BB not included) * Chainrings and BB sold separately

If you're not using a power meter and tracking your watts, then you're giving the competition an advantage. SRAM's brilliantly stiff, light RED cranks feature a Quarq Power Meter integrated into the crank for easy installation, low weight, and minimal maintenance. Your power info is transmitted ANT+ wirelessly, enabling you to use the head unit of your choice (sold separately), and with no wires or external sensors, your beautifully sleek road machine stays clutter-free. Other nice features include an easily replaced battery and a wattage reading accuracy of +/- 1.5%. Also, calibration values are stoRED in the CinQo so there's no need to re-calibrate if you switch head units or swap chainrings. Plus, since the power sensor is in the crank, you can easily switch wheels. In addition, SRAM's X Glide R chainrings deliver world-class front shifts, and the oversize carbon arms transfer every watt of your strength.

The SRAM XX1 Eagle Power Meter unites Quarq's DZero power meter platform with carbon tuned crank arms for robust, intuitive power measurement in the lightest ever chassis. The DZero platform embodies 10 years of Quarq's technology advances and adds new features such as dual Bluetooth low energy and ANT+ wireless data transfer, and the Qalvin BLE app. The companion X-SYNC 2 chainrings are designed specifically for Eagle chains and drivetrains. - BB Included: No - Chainring BCD: 104 - Chainrings sold separately

Take your training and racing to new heights with SRAM's XX1 Quarq Power Meter Crankset. It takes SRAM's brilliantly stiff, hollow carbon XX1 cranks, and marries them to an integrated, ultra-precise Quarq Power Meter for feathery low weight and accurate power measurement. Feel every watt course through the crank and propel you forward, while every iota of your strength is recorded with an accuracy of +/- 1.5%. Having precise objective feedback lets you see your improvements. And, to make setup as easy as possible it features an easily accessible, weather-tight battery compartment.